Cooling water tower workflow for cummins diesel generator freezer

In the chiller, the cooling water tower is the water cooling device, water in which and through the air for mass exchange, heat exchange, resulting in water temperature drop; It is widely used in industrial circulating water system and air conditioning circulating water system. So do you know the cooling tower workflow of the chiller?

The working process of cooling water tower of industrial chiller:

1. hot water independent machine room is through the pump with a certain pressure through the pipeline, transverse throat, curved throat, central throat to circulate water pressure to the cooling tower in the water seeding system;

2. purification table, through the hole in the water pipe to sprinkle water evenly on the top of the packing;

3. Under the action of the fan, the dry air with low han value enters the air network from the bottom into the tower. When the hot water flows through the packing surface, the air and water film are formed for heat exchange.

4. when the fan is running, under the effect of static pressure in the tower, water molecules continue to evaporate into the air, become water vapor molecules, the average kinetic energy of the remaining water molecules will be reduced, so that the temperature of the circulating water drops;

5. Evaporative cooling has nothing to do with the temperature of the air being lower or higher than the water temperature. As long as the water molecules can continuously evaporate into the air, the water temperature will decrease. When the air in contact with water is not saturated, the water molecules continue to evaporate into the air, but when the air on the water-air contact surface reaches saturation, the water molecules will not evaporate out, but in a dynamic equilibrium state;

6. The number of water molecules evaporated is equal to the number returned from the air to the water at the same temperature. It can be seen that the drier the air is in contact with the water, the easier it is to carry out evaporation in the low-temperature constant temperature tank, and the easier it is to reduce the water temperature.

Therefore, while analyzing the specific operation procedures of the cooling tower of the chiller, we should always pay attention to the problems of the chiller, and constantly innovate and strive for better development.

Jiangsu Meiao Power Technology Co., Ltd. is an important manufacturer of diesel generators. Us ao-generator set manufacturers mainly manufacture and sell diesel generator sets, the power of generator sets is 3-3000KW, mobile station is 24-600KW, Marine emergency diesel generator set 24-800KW, gas generator set, heavy oil generator set and all kinds of imported series, special series (trailer, silent speaker, mobile lighthouse, container, etc.) diesel generator Group at the same time engaged in generator set maintenance and generator set accessories after-sales service.