How does MTU diesel generator reduce generator fuel consumption

How to reduce the fuel consumption of the generator, diesel engine compression system wear serious, the body of the joint sealing pad damage, piston assembly error, oil shell side wall damage and so on are the reasons for excessive oil consumption.

A, the engine long-term use of the formation of normal wear, or due to improper maintenance of abnormal wear, will make the cylinder liner of the diesel engine to form longitudinal stretch marks, cylinder diameter, piston side clearance beyond the specified value, so that the piston ring support decreases accordingly, there is no clean scraping phenomenon. Or because the inner support twisted spring in the oil ring is disconnected in the opening position of the oil ring, resulting in unclean oil scraping and combustion, resulting in serious oil consumption symptoms, manifested as the diesel engine starting difficulty, breathing machine oil injection is serious, the exhaust pipe has obvious blue smoke. Moreover, the piston should be up on one side, in the assembly due to the direction of inversion so that the combustion chamber formed inverted state, although it will not affect the start of the diesel engine, but the loss of oil will be quite serious, daily fuel consumption in about 0.5 kg.

Two, when the rental generator oil consumption is too much, we should first check whether there is oil leakage at the connection between the body and the gear chamber cover, the back cover on the side of the running wheel, the large market and the cover cover. In case of oil leakage, pay attention to whether the sealing gasket of each connection is complete, and replace the damaged sealing gasket. If the sealing pad is complete, check whether the connecting screws of each part are loose. Screw loose bolts with a wrench to the specified torque. If part of the above basic normal, and the oil spill in the rack position, oil casing inspection, inspection area mainly in side of the oil with road wheel shell side of the front end, because of mounting screw loosening, oil road wheel under the triangle drive and protection shell frame Angle cause long-term brush touch, grinding oil casing through forming gap and oil generation.

Three, the valve guide wear will burn diesel oil is rare, but according to the introduction of the relevant information, is not a reason to be ignored.

Jiangsu Meiao Power Technology Co., Ltd. is an important manufacturer of diesel generators. The company mainly manufactures and sells diesel generator sets with power of 3-3000kW, mobile power station of 24-600kW, Marine emergency diesel generator set of 24-800kW, gas generator set, heavy oil generator set and all kinds of imported series, special series (trailer, static speaker, mobile lighthouse, container, etc.) diesel generator At the same time, we are engaged in generator set maintenance and after-sale service of generator set accessories.